Compact 3–9kW 6U Rack-Mount DC Power Solution, High Efficiency >96%, Modular 3000W Rectifiers, Flexible AC Input

Product Overview

The 3–9kW 6U rack-mounted DC power solution is engineered to deliver reliable and efficient energy for telecom, IT infrastructure, and industrial sites. Supporting both 380VAC three-phase and 220VAC single-phase input, it provides a regulated –43 to –58VDC output with a rated –53.5VDC, making it suitable for stable DC supply in critical networks.

This system achieves a maximum output capacity of 9kW through three hot-swappable rectifier modules, each rated at 3000W and weighing less than 2kg. With forced-air cooling, high power factor ≥0.99, and total harmonic distortion ≤5%, the rectifiers ensure stable performance and high-quality power conversion even under demanding loads.

Equipped with dual 125A battery breakers and multiple BLVD load breakers, the system offers flexible DC distribution and enhanced safety. Its controller integrates temperature monitoring (battery and ambient), digital inputs, and dry contact alarms, while communication ports (RS232/485, SNMP) enable remote supervision. A front-panel LCD provides intuitive local management.

Designed for durability, the subrack operates from –40℃ to +65℃, tolerates 5–95% non-condensing humidity, and maintains reliable performance up to 3000m altitude. The compact 6U form factor, front-access maintenance, and IP20 protection make it a practical choice for operators seeking efficiency, scalability, and ease of deployment in mission-critical applications.

System

• Dimension: 482.0(W) × 350.0(D) × 6U(H)

• Weight: ≤25kg (without rectifiers)

• Cooling mode: Natural cooling

• Installation mode: Installed on 19-inch rack or inside the cabinet

• Cabling mode: Top inlet and top outlet

• Maintenance mode: Front maintenance, support module grade change

• Protection level: IP20

AC Distribution

• Input mode: 380VAC three-phase or 220VAC single phase

• Input capacity: 1×63A/3P

• Input frequency: 45–66Hz, rated value: 50Hz/60Hz

• AC SPD: 20kA/40kA, 8/20μs

DC Distribution

• Output voltage: –43 ~ –58VDC, rated value: –53.5VDC

• Maximum capacity: 9kW (3kW × 3)

• Battery breakers: 2×125A/1P

• Load breakers: LLVD: None; BLVD: 3×63A/1P, 3×40A/1P, 1×25A/1P

• DC SPD: 10kA, 8/20μs

Rectifier

• Input voltage: 85VAC ~ 300VAC, rated 220VAC

• Efficiency: >96%

• Rated power: 3000W (176–300VAC)

• Working temperature: –40℃ ~ +75℃ (full output below 50℃)

• Dimension: 106.5mm(W) × 286mm(D) × 41.5mm(H) (1U/H)

• Weight: ≤2kg

• Cooling mode: Forced cooling

• Power factor: ≥0.99

• THD: ≤5%

• DC output: –43 ~ –58VDC, rated –53.5VDC, maximum 55A

Controller

• Signal input: 4 AI (3 Battery temp., 1 ambient temp), 7 DI

• Alarm output: 6 dry contact

• Communication port: RS232/485, SNMP

• Display mode: LCD

Environment

• Operating temperature: –40℃ ~ +65℃ (full output below 50℃)

• Storage temperature: –40℃ ~ +70℃

• Operating humidity: 5% ~ 95% (non-condensing)

• Altitude: 0 ~ 3000m (If the altitude is within the range of 2000m to 3000m, the maximum operating temperature decreases by 1℃ as the altitude increases by 200m.)

6U rack-mount DC power solution

modular 3000W telecom rectifier

high efficiency 96% power system

Compact 3–9kW 6U Rack-Mount DC Power Solution, High Efficiency >96%, Modular 3000W Rectifiers, Flexible AC Input Images